成色18k蘑菇8.35mb,蘑菇1.3.4版优化升级,天美视传媒高清完整版,国产综合精品久久久久蜜桃传媒

PVC Processing Aid ZB-401 Series

Product Name：PVC Processing Aid ZB-401 Series

Category： PVC Processing Aid

Brief Introduction：

ZB-401 series is processing aid made from acrylate monomer by emulsion polymerization.
It is mainly used to :
Improve process property of rigid PVC product.
Promote fusion,
Reduce process temperature.
Improve the surface quality of the finished product.
Improve the fluidity of heated PVC resin and extrusion speed.
Improve the melt strength.
Improve the prolongation to make the PVC product more homogeneous.
Improve the mechanical strength.
It is amorphous white powder. It can be dissolved in ketone and trichloromethane, but not in water and alcohol.

PVC Processing Aid ZB-401 Series

Brief Introduction：

Detail

Quality Specification

Item	ZB-401(Low viscosity)	ZB-401(High Viscosity)	ZB-401(ultra-high viscosity)
Inherent Viscosity [ η ], 25°C	5.0-6.0	9.0-11.0	≥12.0
Bulk Density,g/cm³ ≥	0.35	0.35	0.35
Volatile Matter,% ≤	1.5	1.5	1.5
Particle Size 0.45mm(40mesh)passed,% ≥	98	98	98

Property and Application

Item	ZB-401 (Low viscosity)	ZB-401 (High Viscosity)	ZB-401 (ultra-high viscosity)
Main Application	To be used in Calender sheet, thin film , board, pelletization, window profile etc	To be used in pipe, fittings, sheet, board, window, window profile etc	To be used in window, window profile ,sheet, pipe, fittings etc
Typical Characteristic	Good comprehensive property. It is specially fit for high quality window profile.	Good fusion and melt fluidity, It is fit for opaque product such as pipe, fittings, window and window profile.	Good melt fluidity and big melt strength. It is very fit for opaque product with high fillings.
Improve Fusion	●●●●●	●●●●	●●●●
Enhance Melt Strength	●●●	●●●●	●●●●●
Dispersancy	●●●●●	●●●●	●●●●